E.N. 14411-ISO 13006 . Appendix G. Group BⅠa. GL
Test method
Reference value
Declared value
Download
Dynamic coefficient of friction (section 9.6 ANSI A 137.1 2012)
DCOF
>0,42 wet
>0,42 wet (MARRON IMPERIAL, OMBRE DE CARAVAGE, SODALITE BLEU, JASPE
ROUGE)
MATTE
MATTE
Release of hazardous substances
DM-1-2-2007-Reg-CE-1935-2004
Declared value for gl surfaces used on worktops
CONFORMING
Maximum right-angle deviation, in %, in relation to the corresponding production
dimensions
ISO-10545-2
Squadrato ISO 13006 - ±0,3% (±1,5 mm)
±0,2%
Flatness (centre curvature / edge curvature / warpage)
ISO-10545-2
Squadrato ISO 13006 - ±0,4% (±1,8 mm)
±0,2%
Length and width: admitted deviation, in %, of the average size of each tile from
the
production dimensions
ISO-10545-2
Squadrato ISO 13006 - ±0,3% (±1 mm)
±0,15%
Admitted deviation, in %, of the average thickness of each tile from the production
dimensions
ISO-10545-2
±5% (±0,5 mm)
±5%
Surface quality
ISO-10545-2
At least 95% of the tiles must be free from visible flaws
CONFORMING
Maximum straightness deviation, in %, in relation to the corresponding production
dimensions
ISO-10545-2
Squadrato ISO 13006 - ±0,3% (±0,8 mm)
±0,1%
Amount of water absorbed, in percentage
ISO-10545-3
E≤0,5%
average value 0,08%
Breaking strength in N (thickness < 7,5 mm)
ISO-10545-4
≥700 Newton
average value 1350 N
Bending strength in N/mm2
ISO-10545-4
>35 N/mm2
average value 52 N/mm2
Resistance to abrasion of glazed tiles
ISO-10545-7
See manufacturer's declaration
MARRON IMPERIAL; LES QUATRE SAISONS; JASPE ROUGE; SODALITE BLEU - Cl. 2
Resistance to abrasion of glazed tiles
ISO-10545-7
See manufacturer's declaration
OMBRE DE CARAVAGE - Cl. 1
Resistance to abrasion of glazed tiles
ISO-10545-7
See manufacturer's declaration
ONYX BLANCHE - Cl. 5
Resistance to abrasion of glazed tiles
ISO-10545-7
See manufacturer's declaration
CALACATTA ALTISSIMO BLANC; BRÈCHE CAPRAIA - Cl. 4
Thermal shock resistance
ISO-10545-9
-
RESISTANT
Glaze crazing resistence
ISO-10545-11
Required
RESISTANT
Frost resistance
ISO-10545-12
Required
RESISTANT
Resistance to domestic chemicals and additives for swimming pools
ISO-10545-13
GB minimum
GA
Resistance to low concentrations of acids and alkali
ISO-10545-13
See manufacturer's declaration
GLB
GLOSSY
GLOSSY
Resistance to low concentrations of acids and alkali
ISO-10545-13
See manufacturer's declaration
GLA
MATTE
MATTE
Resistance to staining
ISO-10545-14
class 3 minimum
Cl. 4
Notes
For optimal installation results, Nuovo Surfaces recommends maintaining a joint of 2 mm 1/12" for single format installations and 3 mm 1/8" to combine mixed formats.